CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE
INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
Engage the guide to temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.
Fully tighten the bolt<A> first, then the bolt<B>.
INSPECT FRONT SEAT OUTER BELT ASSEMBLY
INSTALL FRONT SEAT OUTER BELT ASSEMBLY
Install the bolt <A> first, then the bolt <B> to temporarily install the front seat outer belt assembly.
Fully tighten the 2 bolts.
| *a | Locking Button |
| *b | Lock |
Connect the pretensioner connector and lock the locking button as shown in the illustration.
Note
Securely lock the locking button.
Connect the shoulder anchor of the front seat outer belt assembly with the nut.
INSTALL CENTER PILLAR GARNISH ASSEMBLY
INSTALL CENTER PILLAR LOWER GARNISH
CONNECT FRONT SEAT OUTER BELT ASSEMBLY
Install the floor anchor of the front seat outer belt assembly with the bolt.
Check if the ELR locks.
Note
The check should be performed with the front seat outer belt assembly installed.
With the front seat outer belt assembly installed, check that the belt locks when it is pulled out quickly.
INSTALL LAP BELT OUTER ANCHOR COVER
Engage the 3 claws to install the lap belt outer anchor cover.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Hatchback)
for LH Side:
for RH Side:
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Wagon)
for LH Side:
for RH Side:
INSTALL REAR UNDER SIDE COVER
INSTALL REAR DOOR SCUFF PLATE
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP (for Hatchback)
for LH Side:
for RH Side:
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP (for Wagon)
for LH Side:
for RH Side:
INSTALL FRONT DOOR SCUFF PLATE
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
INSTALL BATTERY BOX COVER
for Hatchback:
for Wagon:
INSPECT SRS WARNING LIGHT