FRONT SEAT OUTER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY BOX COVER

    for Hatchback:

    Click here

    for Wagon:

    Click here

  3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE

    Click here

  5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. Disconnect the front door opening trim weatherstrip.

  6. REMOVE REAR DOOR SCUFF PLATE

    Click here

  7. REMOVE REAR UNDER SIDE COVER

    Click here

  8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Disconnect the rear door opening trim weatherstrip.

  9. REMOVE LAP BELT OUTER ANCHOR COVER


    1. A01KS7N

      Disengage the 3 claws and remove the lap belt outer anchor cover.

  10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY


    1. A01KR9Q

      Remove the bolt to disconnect the floor anchor of the front seat outer belt assembly.

  11. REMOVE CENTER PILLAR LOWER GARNISH

    Click here

  12. REMOVE CENTER PILLAR GARNISH ASSEMBLY

    Click here

  13. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    1. A01KRLH

      Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.

    2. A01KRR3C01
      *a Protective Tape
      *b Locking Button
      *c Release

      Using a screwdriver, pull out the locking button in the direction indicated by the arrow in the illustration to release the lock, and disconnect the pretensioner connector as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01KT69

      Remove the 2 bolts and front seat outer belt assembly.

  14. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    1. A01KS8E

      Remove the 2 bolts.

    2. Disengage the guide to remove the front shoulder belt anchor adjuster assembly.