SEAT BELT WARNING LIGHT INSPECTION

PROCEDURE


  1. INSPECT CLOCK ASSEMBLY


    1. A01KS55C02
      *a Indicator A
      *b Indicator B
      *c Indicator C
      *d

      Component without harness connected

      (Clock Assembly)

      Apply auxiliary battery voltage to the connector according to the table below.

      OK
      Auxiliary Battery Connection Result

      Auxiliary battery positive (+) - Terminal 3

      Auxiliary battery negative (-) - Terminal 13

      		 Indicator A comes on

      Auxiliary battery positive (+) - Terminal 3

      Auxiliary battery negative (-) - Terminal 14

      		 Indicator B comes on

      Auxiliary battery positive (+) - Terminal 3

      Auxiliary battery negative (-) - Terminal 15

      		 Indicator C comes on

      If the result is not as specified, replace the clock assembly.