REAR SEAT OUTER BELT ASSEMBLY(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  2. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. Engage the guide.

    2. Install the rear seat 3 point type outer belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    3. Connect the floor anchor of the rear seat 3 point type outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Check if the ELR locks.

      Note

      The check should be performed with the rear seat 3 point type outer belt assembly installed.


      1. With the rear seat 3 point type outer belt assembly installed, check that the belt locks when it is pulled out quickly.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  4. INSTALL LOWER DECK TRIM SIDE BOARD (w/ Deck Board)

    Click here

  5. INSTALL NO. 2 DECK SIDE TRIM HOOK

    Click here

  6. INSTALL REAR SEAT SIDE GARNISH

    Click here

  7. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

    Click here

  8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  9. INSTALL REAR UNDER SIDE COVER

    Click here

  10. INSTALL REAR DOOR SCUFF PLATE

    Click here

  11. INSTALL REAR SEAT ASSEMBLY

    Click here

  12. INSTALL REAR DECK TRIM COVER

    Click here

  13. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

  14. INSTALL DECK FLOOR BOX RH (w/ Deck Floor Box)

    Click here

  15. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

  16. INSTALL REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click here

  17. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

  18. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here