CAMERA HEATER REMOVAL

PROCEDURE

1. REMOVE PRE-CRASH SAFETY CITY SENSOR

   Click here

2. REMOVE PRE-CRASH SAFETY CITY HEATER WIRE (for LHD)

   
   

   1. 

      Disengage the 4 clamps.

   2. 

      Disconnect the 2 connectors to remove the pre-crash safety city heater wire.

3. REMOVE PRE-CRASH SAFETY CITY HEATER (for LHD)

   Tech Tips

   
   

   • Perform this step only when replacement of the pre-crash safety city heater is necessary, because it is a non-reusable part.

   • If the pre-crash safety city heater has been removed, replace it with a new one.

   
   

   1. 

      Cut off the part shaded in the illustration.

   2. If the ambient temperature is lower than 15°C:

      
      

      1. Using a heat light, heat the pre-crash safety city heater and windshield glass surface.

         Heating Temperature

         Item	Temperature
         Pre-crash safety city heater	15 to 80°C (59 to 176°F)
         Windshield glass	15 to 80°C (59 to 176°F)

         CAUTION:

         
         

         • Do not touch the heat light and heated parts, touching the heat light may result in burns.

         • Touching heated parts for a long time may result in burns.

         Note

         Do not heat the pre-crash safety city heater or windshield glass excessively.

   3. 

      Using a plier, and remove the pre-crash safety city heater as shown in the illustration.

4. REMOVE PRE-CRASH SAFETY CITY HEATER WIRE (for RHD)

   
   

   1. 

      Disengage the 2 clamps.

   2. 

      Disconnect the 2 connectors to remove the pre-crash safety city heater wire.

5. REMOVE PRE-CRASH SAFETY CITY HEATER (for RHD)

   Tech Tips

   
   

   • Perform this step only when replacement of the pre-crash safety city heater is necessary, because it is a non-reusable part.

   • If the pre-crash safety city heater has been removed, replace it with a new one.

   
   

   1. 

      Cut off the part shaded in the illustration.

   2. If the ambient temperature is lower than 15°C:

      
      

      1. Using a heat light, heat the pre-crash safety city heater and windshield glass surface.

         Heating Temperature

         Item	Temperature
         Pre-crash safety city heater	15 to 80°C (59 to 176°F)
         Windshield glass	15 to 80°C (59 to 176°F)

         CAUTION:

         
         

         • Do not touch the heat light and heated parts, touching the heat light may result in burns.

         • Touching heated parts for a long time may result in burns.

         Note

         Do not heat the pre-crash safety city heater or windshield glass excessively.

   3. 

      Using a plier, and remove the pre-crash safety city heater as shown in the illustration.