FRONT POWER SEAT CONTROL SYSTEM OPERATION CHECK


  1. CHECK POWER SEAT FUNCTION


    1. A00Y6RCC01
      *a Lumbar Support Adjustment Function

      Check the basic function.


      1. Operate the front lumbar power seat switch and check that the following seat function operates properly:


        • Lumbar support adjustment function

  2. CHECK LUMBAR SUPPORT MOTOR


    1. Operate the front lumbar power seat switch and move the lumbar support to either the foremost or rearmost position. Keep the seat in that position for approximately 60 seconds.

    2. Operate the front lumbar power seat switch again and continue to try to move the lumbar support in the same direction as in the previous step. Measure the time until the current is shut off (motor operation sound will stop).

    3. After the current is shut off, release the front lumbar power seat switch and wait for approximately 60 seconds.

    4. Operate the front lumbar power seat switch and move the lumbar support in the opposite direction. Check that the motor operates.