AIRBAG CUT-OFF INDICATOR LIGHT INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT-OFF INDICATOR LIGHT (CLOCK ASSEMBLY)


    1. A01KTJOC01
      *a

      Component without harness connected

      (Airbag Cut-off Indicator Light (Clock Assembly))

      Apply battery voltage to the connector and check the airbag cut-off indicator light condition (clock assembly).

      Result
      Connection Result

      Battery positive (+) - 10 (IG+)

      Battery negative (-) - 7 (PAON)

      		 "ON" comes on

      Battery positive (+) - 10 (IG+)

      Battery negative (-) - 6 (P-AB)

      		 "OFF" comes on

      If the result is not as specified, replace the airbag cut-off indicator light condition (clock assembly).