COMBINATION METER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore,make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal noticesbefore proceeding with work

    Click here

  2. REMOVE BATTERY BOX COVER

    for Hatchback: Click here

    for Wagon: Click here

  3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE NO. 1 METER HOOD CLUSTER

    Click here

  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  8. REMOVE COMBINATION METER ASSEMBLY


    1. A01KT5D

      Remove the 2 screws.

    2. A01KRIS

      Disengage the 2 clips as shown in the illustration.

    3. Disconnect each connector and remove the combination meter assembly.