COMBINATION METER REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore,make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal noticesbefore proceeding with work

   Click here

2. REMOVE BATTERY BOX COVER

   Click here

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

6. REMOVE NO. 1 METER HOOD CLUSTER

   Click here

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

8. REMOVE COMBINATION METER ASSEMBLY

   
   

   1. 

      Remove the 2 screws.

   2. 

      Disengage the 2 clips as shown in the illustration.

   3. Disconnect each connector and remove the combination meter assembly.