COMBINATION METER INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

   
   

   1. Connect each connector.

   2. 

      Engage the 2 clips as shown in the illustration.

   3. Install the combination meter assembly with the 2 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

3. INSTALL NO. 1 METER HOOD CLUSTER

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

6. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. INSTALL BATTERY BOX COVER

   Click here