BACK DOOR COURTESY SWITCH(for Hatchback) INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

   Tech Tips

   Make sure to remove the string before installing a new back door lock assembly.

   
   

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. Install the back door lock assembly with the 2 bolts.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

   3. Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

3. INSTALL DOOR PULL HANDLE

   Click here

4. INSTALL BACK DOOR SIDE GARNISH RH (w/ Back Door Side Garnish)

   Click here

5. INSTALL BACK DOOR SIDE GARNISH LH (w/ Back Door Side Garnish)

   Click here

6. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/ Back Door Side Garnish)

   Click here

7. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/o Back Door Side Garnish)

   Click here