DOOR CONTROL RECEIVER(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. Engage the 2 guides.

   2. Install the door control receiver with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

   Click here

4. INSTALL NO. 2 DECK SIDE TRIM HOOK

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click here

7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

8. INSTALL REAR UNDER SIDE COVER LH

   Click here

9. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

10. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

11. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

12. INSTALL REAR SEAT HEADREST ASSEMBLY

13. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

14. INSTALL REAR DECK TRIM COVER

    Click here

15. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

16. INSTALL TONNEAU COVER ASSEMBLY

    Click here

17. INSTALL DECK FLOOR BOX LH

    w/o Woofer:

    Click here

18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

19. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

20. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

    Click here

21. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

22. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here