DOOR CONTROL RECEIVER(for Wagon) REMOVAL

PROCEDURE

1. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

2. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

   Click here

3. REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)

   Click here

4. REMOVE REAR FLOOR MAT ASSEMBLY

   Click here

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

6. REMOVE DECK FLOOR BOX LH

   w/o Woofer:

   Click here

7. REMOVE TONNEAU COVER ASSEMBLY

   Click here

8. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

   Click here

9. REMOVE REAR DECK TRIM COVER

   Click here

10. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

11. REMOVE REAR SEAT HEADREST ASSEMBLY

12. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

13. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

14. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

15. REMOVE REAR UNDER SIDE COVER LH

    Click here

16. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    
    

    1. Disconnect the rear door opening trim weatherstrip LH.

17. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

18. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

19. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click here

20. REMOVE RECLINING REMOTE CONTROL BEZEL LH

    Click here

21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

22. REMOVE DOOR CONTROL RECEIVER

    
    

    1. 

       Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the 2 guides to remove the door control receiver.