DOOR CONTROL SWITCH INSPECTION

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD) (for Model with Jam Protection Function on Driver Door Window Only)

   
   

   1. w/o Rear Power Window

      
      
      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 (L) - 7 (E) Lock switch pushed Below 1 Ω 3 (L) - 7 (E) off 10 kΩ or higher 9 (UL) - 7 (E) Unlock switch pushed Below 1 Ω 9 (UL) - 7 (E) off 10 kΩ or higher

   2. w/ Rear Power Window

      
      
      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 2 (L) - 1 (E) Lock switch pushed Below 1 Ω 2 (L) - 1 (E) off 10 kΩ or higher 9 (UL) - 1 (E) Unlock switch pushed Below 1 Ω 9 (UL) - 1 (E) off 10 kΩ or higher

2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD) (for Model with Jam Protection Function on Driver Door Window Only)

   
   

   1. w/o Rear Power Window

      
      
      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 (L) - 7 (E) Lock switch pushed Below 1 Ω 1 (L) - 7 (E) off 10 kΩ or higher 3 (UL) - 7 (E) Unlock switch pushed Below 1 Ω 3 (UL) - 7 (E) off 10 kΩ or higher

   2. w/ Rear Power Window

      
      
      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 2 (L) - 9 (E) Lock switch pushed Below 1 Ω 2 (L) - 9 (E) off 10 kΩ or higher 8 (UL) - 9 (E) Unlock switch pushed Below 1 Ω 8 (UL) - 9 (E) off 10 kΩ or higher