WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wireless Door Lock.

      5. Select the setting by referring to the table below.


        Wireless Door Lock
        Tester Display Description Default Setting ECU
        Wireless Control Function that turns the wireless door lock control system on or off ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Hazard Answer Back

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Open Door Warning The buzzer sounds when lock is pressed when any of the doors are ajar. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Auto Lock Time Function that regulates the interval between unlocking and automatic relocking of doors 30 s 00:30 s,01:60 s,10:120 s Main body ECU (Multiplex network body ECU)