| U0100 |
Lost Communication with ECM / PCM "A" |
-
Open or short in sub bus 15 main line or connector
-
Open or short in sub bus 15 branch line or connector
-
Power source circuit of power management control ECU
-
Power management control ECU
-
Power source circuit of ECM
-
ECM
-
Open or short in No. 1 CAN junction connector
|
Tech Tips
As there is no sub bus monitor ECU for sub bus 15, each ECU detects communication stops and stores DTCs.
|
Click here
|
| U0129 |
Lost Communication with Brake System Control Module |
-
Open or short in sub bus 15 main line or connector
-
Open or short in sub bus 15 branch line or connector
-
Power source circuit of power management control ECU
-
Power management control ECU
-
Power source circuit of skid control ECU (brake booster with master cylinder assembly)
-
Skid control ECU (brake booster with master cylinder assembly)
-
Open or short in No. 1 CAN junction connector
|
Tech Tips
As there is no sub bus monitor ECU for sub bus 15, each ECU detects communication stops and stores DTCs.
|
Click here
|
| U0129 |
Lost Communication with Brake System Control Module |
-
Skid control ECU (brake booster with master cylinder assembly) branch line or connector
-
Power source circuit of skid control ECU (brake booster with master cylinder assembly)
-
Skid control ECU (brake booster with master cylinder assembly) ground circuit
-
Skid control ECU (brake booster with master cylinder assembly)
|
Tech Tips
As there is no sub bus monitor ECU for sub bus 15, each ECU detects communication stops and stores DTCs.
|
Click here
|
| U0182 |
Lost Communication with Lighting Control Module Front |
-
AFS ECU (headlight swivel ECU assembly) branch line or connector
-
Power source circuit of AFS ECU (headlight swivel ECU assembly)
-
AFS ECU (headlight swivel ECU assembly) ground circuit
-
AFS ECU (headlight swivel ECU assembly)
|
Tech Tips
The power management control ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 11.
|
Click here
|
| U0293 |
Lost Communication with Hybrid Vehicle Control System |
-
Open or short in sub bus 15 main line or connector
-
Open or short in sub bus 15 branch line or connector
-
Power source circuit of ECM
-
ECM
-
Power source circuit of power management control ECU
-
Power management control ECU
-
Power source circuit of skid control ECU (brake booster with master cylinder assembly)
-
Skid control ECU (brake booster with master cylinder assembly)
-
Open or short in No. 1 CAN junction connector
|
Tech Tips
As there is no sub bus monitor ECU for sub bus 15, each ECU detects communication stops and stores DTCs.
|
Click here
|
| U1002 |
Lost Communication with Gateway Module |
-
Open or short in sub bus 11 main line or connector
-
Open or short in sub bus 11 branch line or connector
-
Power management control ECU
-
AFS ECU (headlight swivel ECU assembly)
(w/ AFS (Adaptive Front-lighting System))
-
Clearance warning ECU assembly
(w/ Simple Intelligent Parking Assist System)
-
Open or short in No. 3 CAN junction connector
-
Open or short in No. 1 CAN junction terminal
|
Tech Tips
The power management control ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 11.
|
Click here
|
| U1110 |
Lost Communication with Clearance Sonar Module |
-
Clearance warning ECU assembly branch line or connector
-
Power source circuit of clearance warning ECU assembly
-
Clearance warning ECU assembly ground circuit
-
Clearance warning ECU assembly
|
Tech Tips
The power management control ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 11.
|
Click here
|