POWER MANAGEMENT CONTROL ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL POWER MANAGEMENT CONTROL ECU

   
   

   1. Install the power management control ECU with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect each connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. INSTALL BATTERY BOX COVER

   for Hatchback: Click here

   for Wagon: Click here