POWER MANAGEMENT CONTROL ECU(for RHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative(-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY BOX COVER

    for Hatchback: Click here

    for Wagon: Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE POWER MANAGEMENT CONTROL ECU


    1. Disconnect each connector.

    2. A01G35J

      Remove the 2 bolts and power management control ECU.