POWER MANAGEMENT CONTROL ECU(for RHD) REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative(-) auxiliary battery terminal notices before proceeding with work.

   Click here

2. REMOVE BATTERY BOX COVER

   Click here

3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

6. REMOVE POWER MANAGEMENT CONTROL ECU

   
   

   1. Disconnect each connector.

   2. 

      Remove the 2 bolts and power management control ECU.