POWER MANAGEMENT CONTROL ECU(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative(-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY BOX COVER

    for Hatchback: Click here

    for Wagon: Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH


    1. A01G3MD

      Disengage the 2 clamps.

    2. Disconnect each connector.

    3. A01G2XX

      Disengage the 2 clamps.

    4. A01G3FA

      Remove the 3 bolts.

    5. Disengage the guide and remove the ECU integration box RH.

  7. REMOVE POWER MANAGEMENT CONTROL ECU


    1. A01G3PR

      Disengage the 2 claws and remove the power management control ECU as shown in the illustration.