ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ УСТАНОВКА

PROCEDURE

1. INSTALL GENERATOR CONTROL ECU ASSEMBLY

   
   

   1. Connect the generator control ECU assembly connector.

   2. Connect the generator control ECU assembly to the battery with the nut.

      Torque:

      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

   3. Connect the engine wire to the generator control ECU assembly with the nut.

      Torque:

      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here