ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ СНЯТИЕ

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE GENERATOR CONTROL ECU ASSEMBLY


    1. B0042K8

      Remove the nut and disconnect the engine wire from the generator control ECU assembly.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    2. B0043X8

      Remove the nut and disconnect the generator control ECU assembly from the battery.

    3. B00437T

      Disconnect the generator control ECU assembly connector.