ULTRASONIC SENSOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 2 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 2 ultrasonic sensors.


    1. A00YB7B

      Disengage the clamp.

    2. A00YB8E

      Disconnect the connector.

    3. A00Y6XL

      Disengage the 2 claws to remove the No. 2 ultrasonic sensor.

  3. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    These illustrations are for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A00YB1G

      Using a screwdriver with its tip wrapped with protective tape, slide the connector lock in the direction indicated by the arrow in the illustration.

    2. A00Y5QE

      Disconnect the connector.

    3. A00Y6XL

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  4. REMOVE ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for all ultrasonic sensor clips.


    1. A00Y8KJ

      Disengage the 2 claws to remove the ultrasonic sensor clip.

  5. REMOVE ULTRASONIC SENSOR CLIP (for Simple Intelligent Parking Assist System)


    1. A00Y8KJ

      Disengage the 2 claws to remove the ultrasonic sensor clip.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  6. REMOVE ULTRASONIC SENSOR BEZEL

  7. REMOVE ULTRASONIC SENSOR BEZEL (for Simple Intelligent Parking Assist System)