CLEARANCE WARNING ECU(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY BOX COVER

    for Hatchback: Click here

    for Wagon: Click here

  3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH


    1. Disconnect each connector.

    2. A01KRSS

      Remove the 3 bolts and ECU integration box RH.

  7. REMOVE CLEARANCE WARNING ECU ASSEMBLY


    1. A01KS7U

      Disengage the 2 claws and remove the clearance warning ECU assembly.