REAR DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

   
   

   1. Resin Type:

      
      

      1. 

         Engage the 6 claws to install the rear door belt moulding assembly.

   2. Plating Type:

      
      

      1. 

         Engage the 5 claws to install the rear door belt moulding assembly.

2. INSTALL REAR DOOR GLASS RUN

   Click here

3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

   Click here

4. INSTALL REAR DOOR REAR WINDOW GUIDE WITH REAR DOOR REAR GUIDE SEAL

   Click here

5. CONNECT REAR DOOR GLASS RUN

   Click here

6. CONNECT REAR DOOR WEATHERSTRIP

   
   

   1. Engage the clip and connect the rear door weatherstrip.

7. INSTALL REAR DOOR SERVICE HOLE COVER

   Click here

8. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

9. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

   Click here

10. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL (w/ Power Window)

    Click here

11. INSTALL REAR ARMREST ASSEMBLY (w/o Power Window)

    Click here

12. INSTALL REAR ARMREST ASSEMBLY (w/ Power Window)

    Click here

13. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL (w/ Power Window)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

14. INSTALL BATTERY BOX COVER (w/ Power Window)

    for Hatchback: Click here

    for Wagon Click here

15. INITIALIZE POWER WINDOW CONTROL SYSTEM (w/ Power Window)

    Click here

16. INSPECT POWER WINDOW OPERATION (w/ Power Window)

    Click here