FRONT DOOR BELT MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER

    Click here

  2. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  3. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY


    1. Resin Type:


      1. A01KT5OC04
        *a Protective Tape
        A01KSBW Protective Tape

        Put protective tape around the front door belt moulding assembly.

      2. Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws and remove the front door belt moulding assembly as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

    2. Plating Type:


      1. A01KT1MC04
        *a Protective Tape
        A01KSBW Protective Tape

        Put protective tape around the front door belt moulding assembly.

      2. Using a screwdriver with its tip wrapped with protective tape, disengage the 5 claws and remove the front door belt moulding assembly as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.