NAME PLATE(for Wagon) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 1 back door emblem.

    3. Remove the release paper from the No. 1 back door emblem.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the No. 1 back door emblem as shown in the illustration.

      A01KSSDC01
      *a Location Pin - -

  2. INSTALL BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new back door name plate.

    3. Remove the release paper from the back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the back door name plate as shown in the illustration.

      A01KRTPC01
      *a Profile of Back Door Panel - -
      Standard Measurement
      Area Measurement Area Measurement
      A 43.7 mm (1.72 in.) B 155.3 mm (6.11 in.)
      C 85.5 mm (3.37 in.) D 104.3 mm (4.11 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 2 back door name plate.

    3. Remove the release paper from the No. 2 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 back door name plate as shown in the illustration.

      A01KTYMC01
      *a Profile of Back Door Panel - -
      Standard Measurement
      Area Measurement Area Measurement
      A 104.2 mm (4.10 in.) B 102.4 mm (4.03 in.)
      C 163.8 mm (6.45 in.) D 315.9 mm (12.4 in.)

  4. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 3 back door name plate.

    3. Remove the release paper from the No. 3 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 3 back door name plate as shown in the illustration.

      A01KRMKC01
      *a Profile of Back Door Panel - -
      Standard Measurement
      Area Measurement Area Measurement
      A 102 mm (4.02 in.) B 40.8 mm (1.61 in.)
      C 17.3 mm (0.681 in.) D 150.5 mm (5.93 in.)

  5. INSTALL SIDE PANEL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new side panel emblem.

    3. Remove the release paper from the side panel emblem.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the side panel emblem as shown in the illustration.

      for LH Side:

      A01KTX0C01
      *a Profile of Fender Panel - -
      Standard Measurement
      Area Measurement Area Measurement
      A 135.4 mm (5.33 in.) B 51.9 mm (2.04 in.)

      for RH Side:

      A01KU00C01
      *a Profile of Fender Panel - -
      Standard Measurement
      Area Measurement Area Measurement
      A 28.0 mm (1.10 in.) B 141.6 mm (5.57 in.)