REAR DOOR WINDOW FRAME MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR BELT MOULDING ASSEMBLY

    Click here

  2. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING

    Tech Tips

    When removing the rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Door Front Window Frame Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or rear door front window frame moulding excessively.


    1. Using a heat light, heat the rear door front window frame moulding.

    2. A013AZSC02
      A01399X Double-sided Tape

      Using a moulding remover, disengage the clip and guide, and peel off the double-sided tape to remove the rear door front window frame moulding.