FRONT DOOR WINDOW FRAME MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR REAR WINDOW FRAME MOULDING

    Tech Tips

    When installing a new front door rear window frame moulding, heat the vehicle body and front door rear window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Front Door Rear Window Frame Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or front door rear window frame moulding excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new front door rear window frame moulding.


      1. Using a heat light, heat the vehicle body and front door rear window frame moulding.

      2. Remove the release paper from the front door rear window frame moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. A00YOUSC02
        A00YNOZ Double-sided Tape

        Engage the clip and guide, and install the front door rear window frame moulding.

  2. CONNECT FRONT DOOR WEATHERSTRIP


    1. Engage the 2 clips and install the front door weatherstrip.

  3. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

    Click here