REAR VIEW MONITOR SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips


  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • To confirm the operation condition of this system, refer to Operation Explanation (System Description).

    Click here

Rear View Monitor System
Symptom Suspected Area Link
When reverse (R) has been selected, an image of the area behind the vehicle is not displayed (screen is not black) Proceed to "Reverse Signal Circuit"*1

Click here

Proceed to "Reverse Signal Circuit"*2

Click here

Proceed to "Radio Receiver Power Source Circuit"*1

Click here

Proceed to "Radio Receiver Power Source Circuit"*2

Click here

Radio and display receiver assembly

Click here

When reverse (R) has been selected, an image of the area behind the vehicle is not displayed (screen is black) Proceed to "Image from Camera for Rear View Monitor is Abnormal"

Click here

Radio and display receiver assembly

Click here

When a shift state other than reverse (R), an image of the area behind the vehicle is displayed Proceed to "Reverse Signal Circuit"*1 Click here
Proceed to "Reverse Signal Circuit"*2

Click here

Radio and display receiver assembly

Click here

Image from the camera for the rear view monitor is abnormal (color, distorted picture) Proceed to "Image from Camera for Rear View Monitor is Abnormal"

Click here

Radio and display receiver assembly

Click here

When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted) Check that the camera is correctly installed

Click here

Guide lines are not displayed Rear television camera assembly

Click here