TOYOTA PARKING ASSIST-SENSOR SYSTEM(for Hatchback) SYSTEM DESCRIPTION


  1. GENERAL


    1. This system uses ultrasonic sensors to detect any obstacles at the corners and the rear of the vehicle. The system then informs the driver of the distance between the sensors and an obstacle as well as their positions by indicating them on the multi-information display (in the combination meter assembly), multi-display on the radio and display receiver assembly and by sounding a buzzer.

  2. FUNCTION OF COMPONENTS

    Component Function

    • No. 1 Ultrasonic Sensor

    • No. 2 Ultrasonic Sensor

    		 Detects the distance between the vehicle and an obstacle

    • No. 1 Clearance Warning Buzzer

    • No. 2 Clearance Warning Buzzer

    		 Sounds to inform the driver according to the distance to an obstacle
    Multi-information Display (on Combination Meter Assembly)

    • Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle

    • Displays a malfunction of the ultrasonic sensor to inform the driver
    Clearance Sonar Indicator (on Combination Meter Assembly) Illuminates to inform the driver while the TOYOTA parking assist-sensor system power is on (the engine switch is on (IG) and the TOYOTA parking assist-sensor system is on)
    Combination Meter Assembly Transmits the ON/OFF signal to the clearance warning ECU assembly

    Brake Booster with Master Cylinder Assembly

    (Skid Control ECU)

    		 Transmits the vehicle speed signal to the clearance warning ECU assembly
    Steering Pad Switch Assembly (Multi-information Switch) Enables, disables or cuts off the operation of the TOYOTA parking assist-sensor system by transmitting the switch operation signal to the combination meter assembly
    Clearance Warning ECU Assembly

    • Judges the approximate distance between the vehicle and an obstacle based on the signals from the ultrasonic sensors and sends it to the multi-information display

    • Judges the approximate distance between the vehicle and an obstacle based on the signals from the ultrasonic sensors and sounds the buzzer

    • Receives the temporary mute setting signal and clearance sonar setting screen information from the radio and display receiver assembly via CAN communication
    Main Body ECU (Multiplex Network Body ECU) Transmits the illumination signal to the clearance warning ECU assembly
    Hybrid Vehicle Control ECU Assembly Transmits the shift state signal to the clearance warning ECU assembly
    Air Conditioning Amplifier Assembly Transmits the temperature information to the clearance warning ECU assembly
    Radio and Display Receiver Assembly

    • Receives ultrasonic sensor information from the clearance warning ECU assembly via CAN communication, and displays it on the multi-display

    • Sends the temporary mute setting signal and clearance sonar setting screen information to the clearance warning ECU assembly via CAN communication

  3. OPERATION EXPLANATION


    1. The operating conditions of each ultrasonic sensor differ according to the installation position as shown in the table below.

      Installation Position Operating Condition
      Front

      • Power switch is on (IG).

      • TOYOTA parking assist-sensor system is on.

      • A shift state other than park (P) or reverse (R) has been selected.

      • Vehicle speed is approximately 10 km/h (6 mph) or less.

      • Power switch is on (IG).

      • TOYOTA parking assist-sensor system is on.

      • Reverse (R) has been selected.
      Rear

      • Power switch is on (IG).

      • TOYOTA parking assist-sensor system is on.

      • Reverse (R) has been selected.

      When the system operates, the clearance warning ECU assembly transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within one or more of the sensors ranges, the waves are reflected back to the sensors, which transmit them to the clearance warning ECU assembly.

      Based on this information, the clearance warning ECU assembly sends signals to the radio and display receiver assembly, the combination meter assembly and the clearance warning buzzers. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.

      Tech Tips

      Refer to Detection Range Measurement and Display Inspection.

      Click here