NOISE FILTER(for Wagon) INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A01KRBL

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover is deformed during installation, replace the terminal and terminal cover with new ones.

    2. A01KS6M

      Engage the 6 claws to install the 2 new terminal covers with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If a terminal cover is deformed during installation, replace the terminal, terminal covers and condenser with new ones.

    3. A01KS9Z

      Insert the cover as shown in the illustration and engage the claw.

    4. Engage the clamp to temporarily install a new radio setting condenser with wire harness.

    5. Install the new radio setting condenser with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

    Click here

  4. INSTALL NO. 2 DECK SIDE TRIM HOOK

    Click here

  5. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

  7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  8. INSTALL REAR UNDER SIDE COVER LH

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  10. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

  11. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

  12. INSTALL REAR SEAT HEADREST ASSEMBLY

  13. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  14. INSTALL REAR DECK TRIM COVER

    Click here

  15. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  16. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  17. INSTALL DECK FLOOR BOX LH

    w/o Woofer:

    Click here

  18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

  19. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

  20. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

    Click here

  21. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  22. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here