RADIO ANTENNA CORD(for Hatchback) INSTALLATION

PROCEDURE

1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Align the No. 3 antenna cord sub-assembly positioning tape with the markings of the roof headlining assembly.

      

      *A	for Standard Roof	*B	for Glass Roof
      *a	Notch	*b	Hollow
      *c	Marking	-	-
      	Positioning Tape		Adhesive Tape
      	Front	-	-

   2. for Glass Roof:

      
      

      1. Push the No. 3 antenna cord sub-assembly into the hollow of roof headlining assembly.

   3. Install the No. 3 antenna cord sub-assembly to the roof headlining with new adhesive tape.

      Note

      
      

      • Apply the tape securely in place.

      • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

   4. Install the No. 3 antenna cord sub-assembly to the notch of the roof headlining assembly.

2. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

3. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Instrument Panel Side)

   
   

   1. for LHD:

      
      

      1. Engage the 6 clamps.

      2. Install the antenna cord sub-assembly with the bolt.

         Torque:

         7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      3. Connect each connector.

   2. for RHD:

      
      

      1. Engage the 5 clamps.

      2. Install the antenna cord sub-assembly with the bolt.

         Torque:

         7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      3. Connect each connector.

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

   Click here

5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

   Click here