RADIO ANTENNA CORD(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

    Click here

  2. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

    Click here

  3. REMOVE ANTENNA CORD SUB-ASSEMBLY (for Instrument Panel Side)


    1. for LHD without Digital Audio Broadcasting Antenna:


      1. Disconnect each connector.

        A01KT3LC03
        *A w/o Radio Receiver - -

      2. Remove the bolt.

      3. Disengage the 6 clamps and remove the antenna cord sub-assembly.

    2. for LHD with Digital Audio Broadcasting Antenna:


      1. Disconnect each connector.

        A01KT9C

      2. Remove the bolt.

      3. Disengage the 6 clamps and remove the antenna cord sub-assembly.

    3. for RHD without Digital Audio Broadcasting Antenna:


      1. Disconnect each connector.

        A01KS7KC03
        *A w/o Radio Receiver - -

      2. Remove the bolt.

      3. Disengage the 5 clamps and remove the antenna cord sub-assembly.

    4. for RHD with Digital Audio Broadcasting Antenna:


      1. Disconnect each connector.

        A01KR2W

      2. Remove the bolt.

      3. Disengage the 5 clamps and remove the antenna cord sub-assembly.

  4. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  5. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Disengage the No. 3 antenna cord sub-assembly from the notch of the roof headlining assembly.

      A01KTJ8C01
      *A for Standard Roof *B for Glass Roof
      *a Notch - -
      A01KSBW Adhesive Tape A01KR22 Front

    2. Remove the adhesive tape from the roof headlining assembly.

    3. Remove the No. 3 antenna cord sub-assembly from the roof headlining assembly.

  6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Digital Audio Broadcasting Antenna)

    A01KU0W

    1. Disconnect the connector.

    2. Disengage the 6 clamps to remove the No. 2 antenna cord sub-assembly.