RADIO RECEIVER REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A01KR89

      Remove the 4 bolts.

    2. A01KRY9

      Pull the radio receiver assembly with bracket toward the rear of the vehicle to disengage the 2 guides.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  4. DISCONNECT ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System)


    1. A01KSC4

      Disconnect the antenna cord sub-assembly connector.

  5. DISCONNECT NO. 1 NAVIGATION WIRE (w/ Navigation System)


    1. A01KR0G

      Disconnect the 2 No. 1 navigation wire connectors.

  6. REMOVE NO. 1 RADIO BRACKET


    1. w/o Navigation System:


      1. A01KSI7

        Remove the 3 screws and No. 1 radio bracket.

    2. w/ Navigation System:


      1. A01KSXY

        Remove the 5 screws and No. 1 radio bracket.

  7. REMOVE NO. 2 RADIO BRACKET


    1. w/o Navigation System:


      1. A01KTI5

        Remove the 3 screws and No. 2 radio bracket.

    2. w/ Navigation System:


      1. A01KTC6

        Remove the 5 screws and No. 2 radio bracket.

  8. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

  9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

  10. REMOVE NAVIGATION ECU (w/ Navigation System)