RADIO RECEIVER REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A01G3RA

      Remove the 4 bolts.

    2. A01G3DL

      Disengage the 2 guides and pull the radio receiver assembly with bracket toward the rear of the vehicle.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  4. REMOVE NAVIGATION ECU WITH BRACKET (w/ Navigation System)

    Click here

  5. REMOVE NO. 1 RADIO BRACKET


    1. A01G362

      Remove the 3 screws and No. 1 radio bracket.

  6. REMOVE NO. 2 RADIO BRACKET


    1. A01G3JS

      Remove the 3 screws and No. 2 radio bracket.

  7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY