REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH side and LH side.

PROCEDURE


  1. INSTALL REAR SPEAKER ASSEMBLY


    1. Using an air riveter or a hand riveter, install the rear speaker assembly with 3 new rivets.

      A01KRR7C02
      *a INCORRECT *b CORRECT
      *c Riveter *d Mandrel

      Note


      • Do not touch the cone part of the speaker.

      • Do not pry on the rivets with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivets to the speaker.

      • Do not leave any clearance between the rivet heads and speaker.

      • Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivets.

      Tech Tips


      • Install the rivets in the order shown in the illustration.

      • If the rivet cannot be cut, pull it once and cut it.

    2. Connect the connector.

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  3. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

    Click here

  4. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL (w/ Power Window)

    Click here

  5. INSTALL REAR ARMREST ASSEMBLY (w/o Power Window)

    Click here

  6. INSTALL REAR ARMREST ASSEMBLY (w/ Power Window)

    Click here