FRONT DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH side and LH side.

PROCEDURE


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Using an air riveter or a hand riveter, install the front No. 1 speaker assembly with 3 new rivets.

      A01KTX2C02

      Riveter
      *a INCORRECT *b CORRECT
      *c Riveter *d Mandrel

      Note


      • Do not touch the cone part of the speaker.

      • Do not pry on the rivets with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivets to the speaker.

      • Do not leave any clearance between the rivet heads and speaker.

      • Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivets.

      Tech Tips


      • Install the rivets in the order shown in the illustration.

      • If the rivet cannot be cut, pull it once and cut it.

    2. Connect the connector.

  2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Engage the 3 claws to install the front No. 2 speaker assembly.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

  5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  7. INSTALL DOOR ASSIST GRIP ASSEMBLY

    Click here