STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Engage the 4 claws, 2 pins and 2 guides to install the steering pad switch assembly to the steering wheel sub-assembly.

   2. Install the 2 screws.

      Torque:

      2.35 N*m  { 24 kgf*cm, 21 in.*lbf }

   3. Engage the steering pad switch connector clamp to the lower steering wheel boss cover.

   4. Connect the steering pad switch connector to the spiral cable sub-assembly.

2. INSTALL HORN BUTTON ASSEMBLY

   Click here