STEERING PAD SWITCH REMOVAL

PROCEDURE


  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. Disengage the steering pad switch connector clamp from the lower steering wheel boss cover.

    3. A01KSU6C02
      *a Pin
      *b Guide

      Remove the 2 screws.

    4. Disengage the 4 claws, 2 pins and 2 guides to remove the steering pad switch assembly from the steering wheel sub-assembly.