PARKING BRAKE CABLE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.

PROCEDURE


  1. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

    Click here

  2. REMOVE PARKING BRAKE CABLE END STOPPER


    1. A01G310

      Push the No. 1 parking brake cable assembly and rotate the cable end 90°.

    2. A01G31F

      Pull the No. 1 parking brake cable assembly out of the parking brake equalizer.

    3. Remove the parking brake cable end stopper.

  3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A01G2J6

      Remove the No. 2 wire adjusting nut.

    2. A01G3OC

      Pull up the parking brake lever sub-assembly claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    3. Remove the No. 1 parking brake cable assembly from the parking brake lever sub-assembly.

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  5. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR


    1. A01G3NC

      Remove the 3 nuts and front No. 1 floor heat insulator.

  6. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A01G2PD

      Remove the 3 nuts and front No. 2 floor heat insulator.

  7. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for LH Side)

    Click here

  8. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for RH Side)

    Click here

  9. REMOVE PARKING BRAKE LEVER PROTECTOR


    1. A01G324

      Remove the parking brake lever protector.

  10. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Remove the 5 bolts, disengage the clamp and remove the No. 3 parking brake cable assembly.

      A01G3E6
    2. A01G31C

      Pull out the No. 3 parking brake cable assembly to the outside of the body.

    3. A01G3AC

      Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    4. A01G3XTC02
      *1 Rear Disc Brake Cylinder Assembly
      *a Clip

      Disengage the clip and remove the No. 3 parking brake cable assembly.

  11. REMOVE NO. 1 PARKING BRAKE CABLE CLAMP


    1. A01G2QQ

      for Separate type No. 1 parking brake cable clamp:


      1. Disengage the 2 claws to remove the No. 1 parking brake cable clamp from the No. 3 parking brake cable assembly.

    2. for One-piece type No. 1 parking brake cable clamp:


      1. Using pliers or equivalent, remove the No. 1 parking brake cable clamp from the No. 3 parking brake cable assembly.

        Tech Tips

        The No. 1 parking brake cable clamp cannot be reused once removed. Make sure to remove it from the No. 3 parking brake cable assembly.