BRAKE BOOSTER PUMP(for LHD) REMOVAL

PROCEDURE


  1. REMOVE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

    Click here

  2. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

    Click here

  3. REMOVE FRONT NO. 4 BRAKE TUBE


    1. A0139PX

      Using a union nut wrench, disconnect the front No. 4 brake tube from the front flexible hose.

    2. Remove the bolt.

    3. A0139JL

      Disengage the clamp and remove the front No. 4 brake tube from the brake actuator bracket assembly.

  4. REMOVE FRONT NO. 1 BRAKE TUBE


    1. A013B0YC01
      *1 No. 2 Brake Tube Clamp Bracket
      *2 No. 4 Brake Tube Clamp
      *3 Front No. 1 Brake Tube

      Remove the 2 bolts, No. 4 brake tube clamp and No. 2 brake tube clamp bracket.

    2. Using a union nut wrench, disconnect and remove the front No. 1 brake tube from the brake booster pump assembly.

  5. REMOVE BRAKE BOOSTER PUMP ASSEMBLY WITH BRACKET


    1. A013ANR

      Disconnect the 2 connectors and disengage the clamp from the brake booster pump assembly.

    2. A0139NR

      Disengage the wire harness clamp and 2 fuel line clamps from the brake actuator bracket assembly.

      Note

      Do not kink or damage the fuel lines.

    3. A0139LE

      Remove the 3 nuts and brake booster pump assembly with bracket.

      Note

      Do not damage the fuel lines, brake lines and wire harness.

  6. REMOVE BRAKE BOOSTER PUMP ASSEMBLY


    1. A0139VMC01
      *1 Brake Actuator Case Collar
      *2 Brake Booster Pump Bushing
      *3 Brake Actuator Bracket Assembly
      *4 Brake Booster Pump Assembly
      *a Nut

      Remove the 2 nuts, 2 brake booster pump bushings, 2 brake actuator case collars and brake booster pump assembly from the brake actuator bracket assembly.