BRAKE PEDAL(for RHD) REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE PEDAL PAD

  2. INSTALL BRAKE PEDAL BUSHING


    1. A00YQ5HC01
      A00YPNE Lithium Soap Base Glycol Grease

      Apply lithium soap base glycol grease to 2 new brake pedal bushings.

    2. Install the 2 brake pedal bushings to the brake pedal sub-assembly.

  3. INSTALL BRAKE PEDAL SHAFT COLLAR


    1. Install the brake pedal shaft collar to the brake pedal sub-assembly.

  4. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    1. A00YPRH

      Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.

      Torque:
      17.3 N*m  { 176 kgf*cm, 13 ft.*lbf }