BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  2. REMOVE COMBINATION METER ASSEMBLY

    Click here

  3. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


    1. A0139BS

      Disengage the claw and slide the wire harness protector from the instrument panel junction block assembly.

    2. Disconnect the connector from the main body ECU and separate the wire harness protector.

    3. A013AUF

      Disconnect the 5 connectors and disengage the clamp to separate the wire harnesses.

    4. Remove the 2 bolts, screw and instrument panel junction block assembly.

  4. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

    Click here

  5. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  6. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

    Click here

  7. REMOVE BRAKE PEDAL RETURN SPRING


    1. A013B6X

      Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.

  8. REMOVE PUSH ROD PIN


    1. A013AR2

      Remove the clip and push rod pin to separate the brake pedal support assembly from the push rod clevis.

  9. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A0139LA

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement assembly.

    2. A013AGR

      Disengage the clamp and separate the wire harness.

    3. A013AI8

      Remove the 4 nuts and brake pedal support assembly.

    4. A013ANU

      Remove the nut from the brake pedal support assembly.