TIRE PRESSURE WARNING RECEIVER(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   
   

   1. 

      Connect the connector to the tire pressure warning ECU and receiver.

   2. Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

   3. Install the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

2. INSTALL ROOF HEADLINING

   Click here

3. REGISTER TRANSMITTER ID

   Click here

4. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here

5. PERFORM INITIALIZATION

   Click here