HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Install the rear height control sensor sub-assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Engage the clamp.

   3. Connect the connector.

2. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. INSTALL BATTERY BOX COVER

   for Wagon: Click here

   for Hatchback: Click here

4. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

5. ADJUST HEADLIGHT AIMING

   Click here