REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. Install the rear light assembly with the 3 nuts.

      Torque:
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    2. Connect the connector.

  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (for Wagon)

    Click here

  3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (for Hatchback)

    Click here

  4. INSTALL DOOR PULL HANDLE (for Wagon)

    Click here

  5. INSTALL DOOR PULL HANDLE (for Hatchback)

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH LH (for Wagon)

    Click here

  7. INSTALL BACK DOOR SIDE GARNISH LH (for Hatchback)

    w/ Back Door Side Garnish: Click here

  8. INSTALL BACK DOOR SIDE GARNISH RH (for Wagon)

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL BACK DOOR SIDE GARNISH RH (for Hatchback)

    w/ Back Door Side Garnish:

    Tech Tips

    Use the same procedure as for the LH side.

  10. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (for Wagon)

    Click here

  11. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (for Hatchback)

    w/o Back Door Side Garnish: Click here

  12. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (for Hatchback)

    w/ Back Door Side Garnish: Click here