REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01KTDZC03
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The stop light comes on

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The turn signal light comes on

      If the result is not as specified, replace the bulb or rear combination light socket and wire sub-assembly LH.

    2. Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The taillight comes on

      If the result is not as specified, replace the rear combination light lens and body or rear combination light socket and wire sub-assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01KTDZC05
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The stop light comes on

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The turn signal light comes on

      If the result is not as specified, replace the bulb or rear combination light socket and wire sub-assembly RH.

    2. Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 The taillight comes on

      If the result is not as specified, replace the rear combination light lens and body or rear combination light socket and wire sub-assembly RH.