REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

PROCEDURE

1. REMOVE REAR COMBINATION LIGHT LED

   

   
   

   1. Disconnect the connector.

   2. Remove the 4 screws and rear combination light LED from the rear combination light lens and body.

2. REMOVE REAR TURN SIGNAL LIGHT BULB

   
   

   1. 

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to disconnect them as a unit.

   2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

   
   

   1. 

      Disengage the clamp to remove the rear combination light socket and wire sub-assembly.