LICENSE PLATE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY (for Hatchback)


    1. A013A43C01
      *a

      Component without harness connected

      (License Plate Light Assembly)

      Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.

    2. Check that the license plate light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the bulb or license plate light socket plug.

  2. INSPECT LICENSE PLATE LIGHT ASSEMBLY (for Wagon)


    1. A0139UKC01
      *a

      Component without harness connected

      (License Plate Light Assembly)

      Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

    2. Check that the license plate light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the bulb or license plate light socket plug.